It took three tries to finally get the toe-in adjustment set correctly on those new Northwave Ninja shoes. Now they’re all set and I only need the camber shims to set the rotational angle. I took them on a test spin, and they feel a lot better than when I first installed the cleats, but I really do need the shims. I put on a set of shortened Nike spikes. The threaded holes in the sole are fairly deeply recessed, so you need about 7mm of thread showing below the base of the spike for them to be fully engaged. I pushed out the threaded studs, cut down the ends of the plastic spikes, then reinserted the studs so more thread would show.
D = 4.22-miles, Vavr = 11.3 mph, Vmax = 25.4 mph, T = 22-minutes
0 Responses to “Toe-in Dialed”