Root’s Speed Shop-Not so Speedy

Update, last Sunday Fabio came over with impact drill and bits and we laid out the lift and started to drill the mounting. There was some delays as we went back and forth to the store to get various bits (literally) that we’d realized we would need. The pilot hole actually went fairly easily, but when suddenly I heard a change in the sound I got a little concerned and started poking around. It turns out that with the short 6″ bit we had already drilled through the conrete slab and hit aggregate. The slab was right at 4″, and looking at the provided anchors and the spec documents, this was not going to work. Calls around to the home improvment stores open on Sunday did not come up with any anchors we could use. Denied! So we will have to try again this weekend, with larger but shallower anchors. We’ll see how it goes!